Is it possible to use DDC data input of DDP?
I have DDC showing energy time curve (envelop) of channel B. Can I define DDP to measure the time from a peak (first or second) to a specified energy level? This is similar to decay time measurement. A screen shot is attached.
DDP using DDC as source
4 posts
• Page 1 of 1
DDP using DDC as source
by suktan » Mon Jan 11, 2021 2:53 pm
- Attachments
-
- ETC_DDP.png (94.8 KiB) Viewed 17598 times
- suktan
- Posts: 15
- Joined: Fri Aug 14, 2020 12:04 pm
Re: DDP using DDC as source
by VirtinsTech » Thu Jan 14, 2021 2:27 am
Thank you for your question.
Unfortunately no. It can only be measured manually on DDC for the current version.
Unfortunately no. It can only be measured manually on DDC for the current version.
- VirtinsTech
- Site Admin
- Posts: 290
- Joined: Tue Oct 01, 2013 3:06 pm
Re: DDP using DDC as source
by VirtinsTech » Thu Jan 14, 2021 3:43 pm
Looks like you are trying to measure the damping ratio, we might support this measurement in the future.
- VirtinsTech
- Site Admin
- Posts: 290
- Joined: Tue Oct 01, 2013 3:06 pm
Re: DDP using DDC as source
by VirtinsTech » Tue Feb 16, 2021 5:32 am
In case the purpose here is to measure the damping ratio, please refer to viewtopic.php?f=25&t=1257 . It can be measured together with Q factor in frequency response curve.
- VirtinsTech
- Site Admin
- Posts: 290
- Joined: Tue Oct 01, 2013 3:06 pm
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 16 guests