DDP using DDC as source

DDP using DDC as source

Postby suktan » Mon Jan 11, 2021 2:53 pm

Is it possible to use DDC data input of DDP?

I have DDC showing energy time curve (envelop) of channel B. Can I define DDP to measure the time from a peak (first or second) to a specified energy level? This is similar to decay time measurement. A screen shot is attached.
Attachments
ETC_DDP.png
ETC_DDP.png (94.8 KiB) Viewed 1303 times
suktan
 
Posts: 8
Joined: Fri Aug 14, 2020 12:04 pm

Re: DDP using DDC as source

Postby VirtinsTech » Thu Jan 14, 2021 2:27 am

Thank you for your question.

Unfortunately no. It can only be measured manually on DDC for the current version.
VirtinsTech
Site Admin
 
Posts: 181
Joined: Tue Oct 01, 2013 3:06 pm

Re: DDP using DDC as source

Postby VirtinsTech » Thu Jan 14, 2021 3:43 pm

Looks like you are trying to measure the damping ratio, we might support this measurement in the future.
VirtinsTech
Site Admin
 
Posts: 181
Joined: Tue Oct 01, 2013 3:06 pm

Re: DDP using DDC as source

Postby VirtinsTech » Tue Feb 16, 2021 5:32 am

In case the purpose here is to measure the damping ratio, please refer to viewtopic.php?f=25&t=1257 . It can be measured together with Q factor in frequency response curve.
VirtinsTech
Site Admin
 
Posts: 181
Joined: Tue Oct 01, 2013 3:06 pm


Return to Questions

Who is online

Users browsing this forum: No registered users and 0 guests

cron