virtins.com

Posted: **Mon Jan 11, 2021 2:53 pm**

Is it possible to use DDC data input of DDP?

I have DDC showing energy time curve (envelop) of channel B. Can I define DDP to measure the time from a peak (first or second) to a specified energy level? This is similar to decay time measurement. A screen shot is attached.

Posted: **Thu Jan 14, 2021 2:27 am**

Thank you for your question.

Unfortunately no. It can only be measured manually on DDC for the current version.

Posted: **Thu Jan 14, 2021 3:43 pm**

Looks like you are trying to measure the damping ratio, we might support this measurement in the future.

Posted: **Tue Feb 16, 2021 5:32 am**

In case the purpose here is to measure the damping ratio, please refer to viewtopic.php?f=25&t=1257 . It can be measured together with Q factor in frequency response curve.

virtins.com

DDP using DDC as source

DDP using DDC as source

Re: DDP using DDC as source

Re: DDP using DDC as source

Re: DDP using DDC as source