dll for dso-5200A

dll for dso-5200A

Postby Testman » Thu Oct 03, 2013 10:38 am

make a dll is very difficult for those unfamiliar with the language of c. Why not make a dll for DSO-5200A?you could put the source of one of your DSO, for example the VT-DSO-2815H !!

Post at 28-10-2011 18:39

As of now, DSO-5200A is a first-generation DSO and is obsolete. Therefore we have no plan to support it.
Post at 03-10-2013 11:19
Posts: 52
Joined: Wed Oct 02, 2013 9:51 pm

Re: dll for dso-5200A

Postby nudrat » Wed Jan 14, 2015 1:36 pm

If, like biot says, the blinking red LED indicates that the firmware is loaded, does that mean that it starts to blink when you start the DSO software? I assume that the firmware is uploaded by the DSO software.
If that is so, it should mean that the cypress USB chip is still working, but that something is wrong in the communication between the DSO windows software and the main chip.
I see that Hantek has an SDK on their website with some examples in VB and VC. Maybe that way you will be able to find out where things are going wrong.
Are you interested in cisco ccna training Get our self paced testking n10-005 and ccna material - pass-4-sure study packages to pass your Keiser University without any difficulty in Northwood University.
Posts: 1
Joined: Wed Jan 14, 2015 12:30 pm

Re: dll for dso-5200A

Postby VirtinsTech » Wed Jan 21, 2015 10:29 pm

Are you talking about a VT DSO?
Site Admin
Posts: 217
Joined: Tue Oct 01, 2013 3:06 pm

Return to General

Who is online

Users browsing this forum: No registered users and 1 guest