Software Registration - Virtins Technology



	Home \| Products \| Downloads \| Order \| Support \| Applications \| Forum \| Testimonials \| Company \| Contact Us

Software Registration

Please use the following form to submit your Site code and MID values, we will generate the corresponding Activation Code and send it to you afterwards. You can then use the Activation Code to unlock the software.

ACTIVATION CODE REQUEST FORM

Full Name

Company

email

Product

Add-on: Spectrum 3D Plot
Add-on: Data Logger
Add-on: LCR Meter
Add-on: Device Test Plan
Add-on: Vibrometer
Order Reference No.

Site Code*          (Next Site Code in the case of License Extension)

MID*                   (Next MID in the case of License Extension)

Removal Code    (Removal Code is required for License Transfer)

Request Type*

Additional Note   (For re-activation request, please indicate the reason, e.g. hard disk / CPU / main board replaced, etc.)

*Site Code and MID are displayed on the screen after you launch the trial program.
*Request Type: License First Time Activation, License Re-Activation, License Transfer, License Extension (Upgrade)

How the software license is managed with a softkey?
1. License first-time activation (new license)

After successful installation of the software, you should run it in order to obtain the Site code and MID (Machine ID) values for your computer. We need these codes to calculate the Activation Code (softkey) for you. When you launch the trial software, an activation dialog box will pop-up. The Site Code and MID of your computer will be displayed in this dialog box.

You can use the Activation Code Request Form or simply click the "Email Register" button in the above dialog to submit your Site Code and MID.

2. License re-activation (after first-time activation)

Please note a new Activation Code will be given for free ONLY if you:

1) Provide the new Site Code and MID from the LICENSED computer (applicable to the case of system recovery after hardware replacement and the like). Please indicate the replaced hardware (e.g. hard disk, CPU, main board ...), if any, when you submit your request.

or

2) Provide the Removal Code from the LICENSED computer together with the Site Code and MID from the new computer. (applicable to the case of license transfer)

3. License transfer from one computer to another

Two methods:

1) Request for license transfer (recommended)

Remove the license from the original computer and send the Removal Code together with the Site Code and MID from the new computer to us to request for a new activation code.

To remove the license, turn on the "Scroll Lock" key (or press and hold the "Shift" key) on your keyboard and then run the software. The activation dialog box will be displayed. Choose "Remove License", enter the previously issued "Activation Code" in the "Activation Code" field, and press "Continue >>" button and confirm. The "Remove Code" will be displayed to you. Be sure to write down the Removal Code.

2) Do-It-Yourself (only valid if the software versions on both computers are the same)

The procedure is as follows: (Suppose that the license to be transferred from Computer A to Computer B)

(i) On Computer B, install and run the software in order to obtain the Site Code B.

(ii) On Computer A, turn on the "Scroll Lock" key (or press and hold the "Shift" key) on your keyboard and run the software. The activation dialog box will be displayed. Choose "Transfer License", Enter the previously issued "Activation Code A" in the "Activation Code" field, and enter "Site Code B" in the "New Site Code" field, and press "Continue >>" button and confirm. The "Activation Code" for Computer B will be displayed to you.

(iii) On Computer B, enter the "Activation Code B" to unlock the software. Write down and keep the "Activation Code B", because you need it for license transfer or license removal next time.

4. License Extension (Upgrade)

After you purchase an upgrade package, you should submit the Next Site code and the Next MID values from the LICENSED computer to us, we will generate the corresponding new Activation Code and send it to you afterwards. You can then use the new Activation Code to extend your license.

To obtain the Next Site code and the Next MID of your licensed computer, turn on the "Scroll Lock" key (or press and hold the "Shift" key) on your keyboard and then run the software, the activation dialog box will be displayed. Choose "Extend License", the Next Site code and the Next MID will be displayed.

To extend the license, turn on the "Scroll Lock" key (or press and hold the "Shift" key) on your keyboard and then run the software, the activation dialog box will be displayed. Choose "Extend License" and enter the newly issued "Activation Code" in the "Activation Code" field, and press "Continue >>" button.

5. Software Upgrade for the Same License Level, always FREE !

Software upgrade for the same license level is always FREE, moreover, you do not need to apply for a new activation code again (unless otherwise stated explicitly with the new version/build). Same for the case of hardkeys and hardware.

When a new version/build is available online, just uninstall your current version, and download and install the new version/build, the software will be AUTOMATICALLY activated to the level you own.