Sound Level Calibrators
| Model | Description | Datasheet |
Unit Price |
|---|---|---|---|
 SPL-CAL-6021A |
SPL-CAL-6021A sound level calibrator is an IEC 60942: 2017 compliant, Class 1, portable, battery powered sound source suitable for calibration of 1", 1/2" and 1/4" measuring microphone. It features a very stable output sound pressure level through a negative feedback control loop. |
|
US$519.95 |
 SPL-CAL-6022A |
SPL-CAL-6022A sound level calibrator is an IEC 60942: 2017 compliant, Class 2, portable, battery powered sound source suitable for calibration of 1", 1/2" and 1/4" measuring microphones. It features automatic atmospheric pressure compensation and thus no manual compensation is needed. |
|
US$249.95 |
 SPL-CAL-6223F |
SPL-CAL-6223F multi-frequency sound level calibrator is an IEC 60942: 2017 compliant, Class 1, portable, rechargeable battery powered sound source suitable for calibration of 1", 1/2" and 1/4" measuring microphones. It has built-in temperature, humidity and barometric pressure sensors and can display their measured values as well. It is able to automatically compensate for temperature and atmospheric pressure variation. |
|
US$669.95 |
Vibration Calibrators
| Model | Description | Datasheet |
Unit Price |
|---|---|---|---|
 VIB-CAL-606 |
The Handheld vibration calibrator VIB-CAL-606 is a small, self-contained handheld shaker designed for quick and easy checking of accelerometers and vibration measurement systems, providing a known and controlled RMS vibration for verification of accelerometers weighing up to 100g (including cable). |
|
US$599.95 |
IEPE Simulator
| Model | Description | Datasheet |
Unit Price |
|---|---|---|---|
 YE8480 |
YE8480 is a low-noise unit-gain IEPE simulator that simulates the behavior of an IEPE sensor accurately. When used in conjunction with a signal generator, it can be used in place of an IEPE sensor to calibrate or test IEPE signal conditioners. |
|
US$349.95 |
Calibration Capacitors
| Model | Description | Datasheet |
Unit Price |
|---|---|---|---|
 VT-CAP |
VT CAP is a precision capacitor epoxy-sealed inside a metal case with BNC connectors at both ends. It can be used in series with a voltage signal generator in order to simulate charge
output during calibration or checking of a charge amplifier. The capacitor has a low dissipation factor, low dielectric absorption coefficient and very constant capacitance against
temperature and humidity variation. Available nominal capacitance options are: 10 pF, 100 pF, 1 nF, 10 nF, 100 nF |
|