Page 1 of 1

Can the DSO-2820R use the X,Y mode function?

PostPosted: Fri Jun 09, 2017 8:33 pm
by Squatch
I'm looking to test some transistors and could use the x,y mode to plot the characteristic curves. I couldn't find anything in the Multi-Instrument 3.6 manual but I thought that there maybe a way to do it.
Thanks,
Squatch

Re: Can the DSO-2820R use the X,Y mode function?

PostPosted: Fri Jun 16, 2017 1:28 pm
by VirtinsTech
click anywhere within the oscilloscope window, and select "A|B" in the "Oscilloscope Type" selection box in the middle of the oscilloscope view bar at the bottom of the screen. "A|B" is the XY mode or Lissajous pattern.